Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur télécharger pdf (Page 36)

Issue

10.04.A

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

The settings are described in the table below:

Setting Description

VarID The VarID parameters will be set up differently depending on the

protocol used.

Uniqueness

This setting specifies whether the VarID

will be unique at the

XNet network level (Global) of at the XT level (Local).

The default value is ‘Local’.

Length This setting specifies whether the VarID has a fixed length of 8

bytes or a variable length of 32 bytes.

The default value is ‘variable 32 bytes

Format This setting specifies whether the VarID format has the ASCII or

binary format. The default value is ‘ASCII’ as specified for VDCP

standard.

Protocol

Visibility

The protocol visibility allows specifying the list of servers which

will be visible on the various communication ports the protocol will

communicate with.

For a list of servers, use the XNet number of the server and semi-

colon separator (;). If no value is specified, the default is the

local server.

Example: 8;2;3;9

The list order is taken into account in the protocol visibility. This

means that the system first searches for the requested clips on

the first server of the list, then on the second, and so on.

In the above-mentioned example, If a clip with the same identifier

is found on server 8 and server 2, the system would choose the

clip on server 8 should this clip ID be loaded and/or modified.

Delete

Strategy

No Delete Strategy is applied to this version.

By default, the deletion applies to the first visible clip only.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 97 98

Pas de commentaire

Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur Page 36