Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur télécharger pdf (Page 54)

Issue

10.04.A

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

3.7 OSD SETTINGS

OSD Settings p.1.1

[F1]Genlock Error Msg: Yes

[F2]Disk Error Msg : Yes

[F3]Network Error Msg: Yes

[F4]Cue number on OSD: Yes

[F5]Keyword info : No

[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

3.7.1 GENLOCK ERROR MSG

Possible values: Yes (default) / No

This function enables or disables the Genlock information on the output monitor. If

Genlock reference is not correct, the !GkV message appears on the output

monitor.

3.7.2 DISK ERROR MSG

Possible values: Yes (default) / No

This function displays an error message (!Raid) on the output monitor when a disk

is faulty.

Note

The server

is equipped with a RAID disk array. This means that the

operation can continue seamlessly even with 1 faulty disk. If 1 disk is

disconnected during operation, the “!Raid

” message appears on all

output monitors, and another message appears when the operator shuts

down the application, to invite him to replace the disk and rebuild the

RAID array.

Refer to the Technical Reference manual for details on the RAID system

and its maintenance.

3.7.3 NETWORK ERROR MSG

Possible values: Yes (default) / No

This function displays an error message (!Net) on the output monitor when the

network connection is faulty and another message ( Net) when the network

becomes available again and the system is trying to re-connect.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 97 98

Pas de commentaire

Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur Page 54