Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur télécharger pdf (Page 15)

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

Issue 10.4.A

AUDIO METERS ON OSD

Possible values: Yes (default) / No

This parameter enables/disables the display of audio meters at the bottom of each

output monitor.

AUDIO METERS ADJ. (DB)

Possible range: -83.2dB to 0dB. Default: 0dB

This parameter allows adjusting the sensitivity of audio meters on the OSD of the

output monitors. A positive value means that the meters will be more sensitive.

2.2.4 NETWORK SETTINGS

You can also define the Clip edit by network setting on page 3.1, F6 of the setup

menu on the Remote Panel. You will find a description of these settings in the

Multicam user manual.

CLIP EDIT BY NETWORK

Possible values: Disable (default) / Enable

If this function is enabled, other users on the network can trim, rename, delete,

etc. your clips, or modify the keywords and ranking assigned to your clips. If

disabled, only the local operators can modify or delete clips on the server and edit

their metadata.

2.2.5 CLIP MANAGEMENT SETTINGS

You can also define most of the Clip management settings on pages 3.1 to 3.3 of

the setup menu on the Remote Panel. You will find a description of these settings

in the Multicam user manual.

DEFAULT COPY/MOVE

The Default Copy/Move parameter allows specifying whether the copy operations

should be executed preferably using the SDTI or the HCTX GigE network.

If the value selected is ‘SDTI’, the copy operations are first executed through the

SDTI network. If the SDTI network is temporarily unavailable, the transfer is then

tried through the HCTX GigE interface. Transfers to GigE targets will always be

performed via the HCTX GigE interface.

If the value selected is ‘GbE’, the copy operations are first executed via the HCTX

GigE interface. If the transfer is not possible (ports not connected, IP address

unknown, no more connection ports are available), the transfer is then tried

through SDTI.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 97 98

Pas de commentaire

Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur Page 15