Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur télécharger pdf (Page 31)

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

Issue 10.4.A

Setting Description

Exit ASP

Initiates a command to exit the loop as soon

as possible without playing the current

element until its end and jump to the

selected element.

This GPI is used with

playlists in IPDirector.

Exit OUT Initiates a command to exit the loop as soon

as the OUT point of the current element is

reached and jump to the selected element.

This GPI is used with playlists in IPDirector.

None No value is defined.

GPI Delay

Number of seconds and/or frames that the server will wait

after receiving the GPI IN signal to execute the GPI-related

function. The default value is ‘disabled’.

The following information is defined for each individual GPI OUT:

Setting Description

# GPI number

Function Operation that will trigger the GPI OUT. The GPI OUT can be

defined with the following function:

• Replace function

Type Type of GPI signal. Four types are possible:

Close-High

The trigger is done when the

level changes to high level

Close-High

Pulse

The trigger is done on a rising

edge pulse

Open-Low

The trigger is done when the

level changes to low level

Open-Low

Pulse

The trigger is done on a falling

edge pulse.

GPI OUT

advance

Number of seconds and/or frames ahead of the timecode (on

which a GPI is defined)

corresponding to the time when the

GPI OUT will be sent by the server.

The default value is

‘disabled’.

GPI Pulse

Duration

The pulse duration needs to be defined for pulse signals.

The default value is ‘disabled’.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 97 98

Commentaires sur ces manuels

Pas de commentaire

Evs MulticamLSM Version 10.04 - January 2011 Configura Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Evs MulticamLSM Version 10.04 - January 2011 Configura