EVS XT2+ Manuel d'utilisateur télécharger pdf (Page 131)

Example

In the screenshot displayed below, the audio mono channels defined on the A/V material

on the EVS server are allocated to the play channels in the following way:

The audio outputs are in dolby embedded format.

By default, an audio mono channel of the A/V material stored the EVS server is sent to the

corresponding embedded channel of the play channel. In this example, this is the case for

mono channels from 3 to 8.

For mono channels 1 and 2, the default mapping has been changed as follows:

• The audio mono channel 1 of the A/V material is sent to the mono channel 2 of the play

channel, and this for all play channels.

• The audio mono channel 2 of the A/V material is sent to the mono channel 1 of the play

channel, and this for all play channels.

Default Mapping for Audio Inputs and Outputs

Introduction

The tables below present the channel mapping for audio inputs and outputs in the

following configuration:

• XT2+ 6U chassis

• Maximum number of recorders or players (see section "General Information on

Supported Configurations" on page 56).

• Audio hardware configuration: 4 DB15 Analog + 16 BNC Digital

In configurations with less recorders or players, the irrelevant rows or columns should be

disregarded.

121 3. Multicam Configuration

EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 233 234

Pas de commentaire

EVS XT2+ Manuel d'utilisateur Page 131