Evs XT3 Version 11.00 Configuration Manual Manuel d'utilisateur télécharger pdf (Page 215)

Grab image

Availability This setting is only available if the license code 177 is valid.

Description Enables / disables an image grab when the MARKkey on the

LSM Remote Panel is hit, and when a default XFile has been

assigned.

Each time the MARK key is used, a cue point is marked and a

command is sent to the XFile to save that image.

The grab can also be activated on the keyboard with the

combination CTRL + G.

Values Yes / No

Default value No

Browse button

Description Allows users to convert the function of the BROWSE key.

Values The following values are possible:

• Browse:

This will directly activate the playlist browse function,

which is the default function assigned to this key.

• Sort TC:

The system will perform a Sort TC directly. The system

will not prompt the user with a select menu, and it will use

the current TC on the channel to search with the last

selected criteria.

If the user wants to perform a search with different criteria

(Search Net or Local, StartDate, EndDate, CAM/CLIP,

etc… ), the user should use the normal Sort-TC selection

in the upper menu..

Default value Browse

3.8.12. Cam Mapping Settings

Introduction

The Cam Mapping settings allow specifying the settings related to the mapping of

network cameras to unused camera positions on the remote up to the camera D.

These fields are available in the following interfaces:

• in the Multicam Configuration window, Operation tab, in the basic display mode:

◦ on page 5 on the server-based application.

◦ on page 1 on the web-based interface.

• in the Operational setup menu of the Remote Control Panel (page 10.1).

209 3. Multicam Configuration

EVS Broadcast Equipment S.A. -April 2012 Issue 11.00.C

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 226 227

Pas de commentaire

Evs XT3 Version 11.00 Configuration Manual Manuel d'utilisateur Page 215