Evs XT3 Version 11.00 Configuration Manual Manuel d'utilisateur télécharger pdf (Page 125)

Example

In the screenshot displayed below, the audio mono channels defined on the A/V material

on the EVS server are allocated to the play channels in the following way:

The audio outputs are in dolby embedded format.

By default, an audio mono channel of the A/V material stored the EVS server is sent to the

corresponding embedded channel of the play channel. In this situation, this is the case for

mono channels from 3 to 8.

For mono channels 1 and 2, the default mapping has been changed as follows:

• The audio mono channel 1 of the A/V material is sent to the mono channel 2 of the play

channel, and this for all play channels.

• The audio mono channel 2 of the A/V material is sent to the mono channel 1 of the play

channel, and this for all play channels.

Default Mapping for Audio Inputs and Outputs

Introduction

The tables below present the channel mapping for audio inputs and outputs in the

following configuration:

• XT3 6U chassis

• Maximum number of recorders or players

• Audio hardware configuration: 16 XLR Analog + 16 BNC Digital

In configurations with less recorders or players, the irrelevant rows or columns should be

disregarded.

119 3. Multicam Configuration

EVS Broadcast Equipment S.A. -April 2012 Issue 11.00.C

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 226 227

Pas de commentaire

Evs XT3 Version 11.00 Configuration Manual Manuel d'utilisateur Page 125