Evs ENGSoft v1.5 User Guide Manuel d'utilisateur télécharger pdf (Page 44)

ENGSoft v1.5

This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization

44 / 63

Figure 75: Audio routing panel with a configured mapping

The audio configuration panel is divided in several zones:

l Thetoppartcontainsthenameofthecurrentaudioroutingconfiguration.Bydefaultnoconfigurationisset.

l Themiddlezonecontainsuptotwo audio layout graphs,eachonecorrespondingtoapossibleingestscenario,

fouroreightaudio.Eachlayoutmustbecompletelyconnectedtomakeavalidconfiguration.

l Thebottomzonecontainsasummaryofthestatusofthecurrentconfiguration,a"Save"buttontosavethecurrent

configurationanda"Saveas..."buttonwhichallowsyoutochoosethenameoftheconfigurationtosave.



Default audio routing configuration

Bydefaultnoroutingisappliedtothedestinationsubject.Astraightonetoonemappinggraphisapplied:sourcepin#1is

connectedtodestinationpin#1,sourcepin#2todestinationpin#2,andsoon.

Figure 76: Default audio mapping

Audio layout description

Thereareuptotwo audio layout graphsperaudioconfiguration, eachonecorrespondingtoapossibleingestscenario:

fouroreightaudio.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 62 63

Pas de commentaire

Evs ENGSoft v1.5 User Guide Manuel d'utilisateur Page 44