Evs XTnano Version 10.03 - July 2010 Configuration Man Manuel d'utilisateur télécharger pdf (Page 16)

XTnano – Version 10.03 – Configuration Manual

EVS Broadcast Equipment SA – July 2010

Issue

10.03.D

Note

The timecode jump tables are circular: when the table is full, the latest

entry will overwrite the oldest one.

For more information on the settings related to the timecode jump tables, refer to

the sections below.

For more information on the settings related to the definition and monitoring of

timecode jumps, refer to section on the timecode statuses in the Server

Monitoring section of the XTnano Tech Ref Software manual.

TIMECODE TYPES AVAILABLE ON A RECORDER

The settings related to the timecode jump tables are specified on the first page of

SHIFT + F2).

ecodes to work with the video material

called the ‘LTC table’. This is specified in the LTC field, which is not editable.

ollowing timecode types in the USER setting:

material ingested from tapes as it is

the timecode embedded in the video signal.

TIMECODE TYPES USED ON A RECORDER

the Setup screen (accessed via

The operators can use two types of tim

stored by a given recorder on a server:

• The LTC timecodes are automatically stored in the first timecode jump table

• The second type of timecodes has to be specified by the user in the USER

field. It will be stored in the second timecode jump table, the ‘USER TC table’.

The users can specify one of the f

• LTC and VITC timecodes in SD

• LTC, HANC LTC and HANC VITC in HD

The user will have the possibility to work with one of the timecode types defined

for the recorder. Usually, an LTC timecode is used to perform operations on live

events. A VITC timecode is used for video

On the first page of the VGA Setup screen, the Prim.TC field (Primary TC)

specifies which timecode type will be displayed at the bottom the VGA and will be

used to work with the video material stored on the given recorder.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 62 63

Pas de commentaire

Evs XTnano Version 10.03 - July 2010 Configuration Man Manuel d'utilisateur Page 16