Evs IPDirector Version 6.2 - June 2013 IPEDIT User Man Manuel d'utilisateur télécharger pdf (Page 211)

With the Create Clip from Timeline function, the output:

• overwrites or not the initial timeline material,

• is saved as a separate clip (and can therefore be used outside the timeline),

• is directly available as a growing clip in IPDirector.

Live to Tape Function

Description

The Live to Tape function aims at replacing a part of a timeline by A/Vmaterial recorded

live or previously ingested from a different camera angle. The video and audio tracks can

be desynchronized, so it is possible to have different mark INpoints on video and audio

and to start the replacement of A/V material at different points in time for video and audio.

After a pre-roll period, the newly ingested material is automatically displayed on the

monitoring screen.

Typical use is for productions such as daily games or daily shows recorded in studio using

several cameras and a switcher for director's cut ingest. Such productions use the same

environment every day, sound and light are calibrated and they seldom require post-

production. IPEdit is then used instead of VTRdevices.

Limitations and Constraints

• No audio or video transition effect is available between the initial timeline element and

the newly recorded one.

• The audio tracks cannot be desynchronized, so the take junction is the same for all

the audio tracks.

• If an audio track has not been selected in the timeline, audio will be recorded on this

track even so.

• No audio swap, mute or volume automation features are available, even if set in the

Replace settings.

• No video transition effect is available between the initial timeline element and the

newly recorded one.

• In order to achieve a frame accurate monitoring of a new take, the internal frame

synchronizer must be temporarily disabled eventually causing a video line shifting.

This video line shifting is obviously not present anymore when the take ingest has

been done and the timeline mode re-established.

Cabling

The director's cut switcher must be connected to the EVSvideo server as follows.

• It is connected to the recorder channel selected in the Associated Recorder Channel

zone of the IPEdit Status bar. This channel will be used to ingest the new take back to

the server.

IPDirector- Version 6.2- User Manual- IPEdit

6. Timeline 199

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 263 264

Pas de commentaire

Evs IPDirector Version 6.2 - June 2013 IPEDIT User Man Manuel d'utilisateur Page 211