Evs MulticamLSM Version 10.03 - July 2010 Operating Ma Manuel d'utilisateur télécharger pdf (Page 44)

EVS Multicam Version 10.03

–

Operating Manual

EVS Broadcast Equipment SA – July 2010

Issue

10.03.C

8. Video Delay

When the Multicam software has been configured with a base configuration =

Video Delay in the Channel Parameters menu, the Delay Screen will appear

automatically when the application is started. In this case, all play channels will

be available from the Delay screen.

If Multicam is running a base configuration different than Video Delay, this screen

can be called manually from the Clip screen, Playlist Screen or Network Screen by

pressing SHIFT-F7 on the keyboard. In this case, only the play channels assigned

to user #1 (i.e. the 1

EVS Remote Panel if the base configuration is LSM or

maXS, or the 1

protocol if the base configuration is in slave mode).

For each play channel, the operator can adjust:

• the video and audio source (camera angle, and source server if several units

are connected on an SDTI network);

• the desired delay in hh:mm:ss:fr.

For each play channel, the operator can view:

• the actual delay in hh:mm:ss:fr;

• the timecode of the on-air picture

• the timecode of the incoming picture on the associated record channel;

• the status of the associated record channel (Recording / Idle)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 194 195

Pas de commentaire

Evs MulticamLSM Version 10.03 - July 2010 Operating Ma Manuel d'utilisateur Page 44