Evs MulticamLSM Version 10.01 - October 2009 Configura Manuel d'utilisateur télécharger pdf (Page 71)

Issue 10.01.I EVS Multicam Version 10.01 – Configuration Manual

EVS Broadcast Equipment SA – October 2009

3.13.6 RECALL CLIP TOGGLE

Possible values: Enable (default) / Disable

This option allows the operator to select the camera of a clip through the Function

keys. Pressing several times the F_ key browses to CAM A, CAM B, CAM C, CAM

D, CAM E and CAM F.

EVS Controller p.6.2

[F1]Record key : Start REC + Live

[F2]Pointing device : Tablet

[F3]VGA & RMT Sync : No

[F4]PGM/PRV Mode : Enable

[Menu]Quit [Clr+F

]Dft [F9]PgUp [F0]PgDn

3.13.7 RECORD KEY

Possible values: Start REC+Live (default) / Live

This parameter changes the function of the RECORD key on the remote:

• Start REC+Live: Pressing the RECORD key starts the record process and

switches to LIVE mode.

• Live: Pressing the RECORD key only switches to last recorded picture, but the

record is not restarted if it has been previously stopped by the operator.

3.13.8 POINTING DEVICE

Possible values: Tablet (default) / Touch Screen

This setting initializes the Tablet or the Touch Screen. If the tablet is not properly

calibrated, use this function to re-initialize it. If using the Touch Screen, this one

must always be connected to RS422 port #6 of the server, and defined as such at

page 7.1 of the setup.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 92 93

Pas de commentaire

Evs MulticamLSM Version 10.01 - October 2009 Configura Manuel d'utilisateur Page 71