Evs EPSIO Version 1.63 - May 2011 User's Manual Manuel d'utilisateur télécharger pdf (Page 19)

Epsio Version 1.63 – User’s Manual

EVS Broadcast Equipment – May 2011

Issue 1.63.C

Setting Possible

Values

Description

[F4] IP

Address

xxx.xxx.xxx.xxx When the Epsio connection is enabled with the

External Offside parameter, the IP Address of

the Epsio workstation has to be entered in this

parameter to allow the communication between

the EVS server and the Epsio workstation.

[F5] Default

Tool

Offside, Arrow,

Circle,

Graphics

When the Epsio connection is enabled with the

External Offside parameter, thi

s parameter

specifies the tool to be activated by default in

the Epsio menu on the Remote Panel.

[F6] Auto

Mark

On, Off When the Auto Mark parameter is set to ‘On’, a

cue point is created on the record train where

and each time the user enters the Epsio menu.

Such cue points are the same as the cue points

added manually using the Mark

key on the

Remote Panel, and are managed the same way.

For more information on cue points, refer to the

Multicam Operation manual.

2.2.3 ACTIVATING THE CONNECTION BETWEEN EPSIO AND THE

EVS SERVER

To activate the offside line mode and the external offside line mode, proceed as

follows:

1. From the Main menu, select Setup by pressing SHIFT + D to enter the Setup

menu.

2. Press the F9 key to go to the Special Effects settings, and then F0 to go

down to page 9.2:

Special Effect p.9.2

[F1]Paint/Target OSD Monitoring: SD

[F2]Offside Line: Off

[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn

3. Press F2 to access the Offside Line setting and rotate the jog dial to set it to

‘On’.

This will display the External Offside setting.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 72 73

Commentaires sur ces manuels

Pas de commentaire

Evs EPSIO Version 1.63 - May 2011 User's Manual Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Evs EPSIO Version 1.63 - May 2011 User's Manual